Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

湿度换算软件包

湿度不论是在科研领域还是在工业生产中，都是一个很重要的参量指标，在具体的应用中，各领域对湿度参量的使用单位和范围要求是不同的，由此我们编写了一套“湿度换算软件包”，可以在湿度的不同参量和单位间进行换算。本文主要介绍了该软件的主要功能、使用说明以及同国外其它同类软件的数据比对情况。     

微重力环境中重力梯度加速度引起的流体晃动力和力矩的模拟

本文研究了关于旋转轴在贮箱的非对称轴上且远离贮箱的几何中心情况下，流体在微重力环境中由重力梯度加速度诱发的晃动特性。我们以精密Ｘ光光谱天文物理实验卫星（简称ＡＸＡＦ－Ｓ）作为研究对象，获得了由于旋转运动引起的重力梯度加速度的数学表达式。关于晃动问题的数值计算是用与卫星固连的非惯性坐标系为基础，目的是寻求一种较为易处理且适合于流体力学方程的边界和初始条件。通过数值计算获得了流体作用于卫星贮箱上的力和力矩。     

化学气相渗透法制备碳化硅陶瓷复合材料

综述了化学气相渗透法制备连续纤维增强碳化硅陶瓷复合材料的过程，以及碳化硅陶瓷复合材料的性能及应用。     

CPL蒸发器多孔芯内传热传质的非稳态数值模拟

基于多孔芯内局部热力学平衡的假设，考虑了Brinkman和Forchheimer对Darcy定律的修正模型，针对简化的物理模型中所包含的气液相区域，建立了二维分层饱和多孔介质模型，以甲醇为工质对CPL，蒸发器毛细多孔芯内的传热传质过程进行非稳态数值模拟。在不同的热负荷条件下预测气液分层界面的形状和位置、系统由初态达到稳态过程的持续时间，讨论压力和温度的分布。由两层饱和模型所得到的计算结果可知．CPL系统在启动时，为避免高热流时液体脱离多孔区而发生干涸，宜采用小负荷启动；采用预热器，改善蒸气的出口条件；增加蒸发器入口处的工质的过冷度，有利于增加CPL系统启动过程和变工况时的稳定性。文中分析结论为CPL系统的优化设计提供参考。     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

Effects of the Fabrication Processes of NC-Si:H Films on Their Mechanical Properties

Studies of nanoindentation were performed on nc-Si:H films to evaluate the effects of the fabrication processes on their mechani-cal properties. It is observed that with the decrease of the SiH4 contents, the grain size of the films increases gradually, and as does the crystalline volume fraction. The smaller the grains become, the more homogeneous the films, and the more even the hardness as well as the modulus will be. The hardness and the modulus will increase with the substrate’s temperature rising. The hardness and the modulus of the nc-Si:H films on the Si substrate prove to be higher than those on the glass substrate given the same technology parameters. How-ever, the films on the glass substrate appear to be more homogeneous.     

喷射沉积过程中显微组织的形成机制

通过对沉积还纵剖面的组织分析，发现沉积坯在进缘、上下表面及中心部位的显微组织明显不同。边缘及上下表面区试样的退火试验研究表明，细小的枝晶碎块在高温退火过程中发生凝共和粗化，并导致近球状晶粒组织的形成。试验确定其生长服从：D2-D02=6.37×1020e(-70036.1/T)·τ，晶界迁移激活能Qg=582KJ／mol。并依赖于两种机制：（1）在喷射沉积过程中无强烈变形枝晶的均匀化；（2）变形及断裂枝晶的生长和粗化。     

Parylene真空涂覆新工艺研究

简述了Parylene真空沉积的机理,并对采用Parylene真空涂覆的涂层样件进行了全面的性能摸底试验。     

离子镀Ti(N,C)耐磨镀层成分与性能研究

 用空心阴极离子镀技术,在常用的不锈钢(1Cr18Ni9Ti)基材上,镀制Ti(N,C)耐磨镀层。对镀层的成分进行了分析,讨论了镀层成分的耐磨性,显微硬度和附着力的影响。通过对Ti(N,C)镀层与TiN和TiC镀层性能的对比,肯定了Ti(N,C)复合化合物镀层具有更优越的耐磨性和附着力。